Sony BDV-N590 Operating Instructions Manual page 16

When you make connection A
This connection can send both video and audio signals.
• Video signals from the HDMI (IN 1/2) jacks are sent to the HDMI (OUT) jack only when the "HDMI1" or
"HDMI2" function is selected.
• To send an audio signal from the HDMI (IN 1/2) jacks to the HDMI (OUT) jack, you may need to change the audio
output setting. For details, see [Audio Output] in [Audio Settings] (page 40).
• You can change the audio input of a component that is connected to the HDMI (IN 1) jack to the TV (DIGITAL IN
OPTICAL) jack. For details, see [HDMI1 Audio Input mode] in [HDMI Settings] (page 42). (Europe models only.)
When you make connection B, C
Connect the system so that video signals from the system and other component are sent to the TV, and
audio signals from the component are sent to the system.
• If you make connection B, C, set [Control for HDMI] in [HDMI Settings] of [System Settings] to [Off] (page 42).
• You can enjoy component sound by selecting the "AUDIO" function for connection B.
16
GB