Installing And Removing The Optional Table Top Stand - NEC MultiSync UX552 User Manual

Installing and Removing the Optional Table Top Stand

CAUTIONE: • Installing and removing the stand must be done by two or more people.
• When installing the monitor stand, handle the unit with care to avoid pinching your fingers.
For installation, follow the instructions included with the stand or mounting equipment. Use only those devices recommended by
the manufacturer.

NOTEE:
• Install the stand so the long end of the feet face forward. Use the ST-5220 or the ST-551.

• For the ST-5220, ONLY use thumbscrews which are included with the monitor. For the ST-551, ONLY use
thumbscrews which are included with the optional table top stand.
Prevent Tipping


CAUTIONE:
When using the monitor with the optional table top stand, fasten the monitor to a wall using a cord or chain that can support
the weight of the monitor in order to prevent the monitor from falling. Fasten the cord or chain to the monitor using the provided
clamps and screws.
Before attaching the monitor to the wall, make sure that the wall can support the weight of the monitor.

CAUTIONE:
Be sure to remove the cord or chain from the wall before moving the monitor.
Table
322.9 mm
Screw Holes
Cord or chain
Clamp
Screw (M4)
English−14
Optional table top stand
Soft cloth