Advertisement
Quick Links
QIG-TMX4P-552SVSV
UN552S-TMX9P, UN552VS-TMX9P, UN552-TMX9P, UN552V-TMX9P
Parts List
o (4) UN552S , UN552VS, UN552, UN552V Displays
o (4) Onsite Service Warranties (ONSITEMN-3Y-17)
o (4) Peerless Pullout Wall Mounts (DS-VW775)
o (1) Peerless Wall Mount Spacer (DS-VWRS090)
o (1) 25ft Cat5e Patch Cable
o (1) IR/Remote Control Kit (KT-RC3)
o (1) SurgeX 4-Port Power Conditioner
o (1) Display Wall Calibrator Kit (KT-LFD-CC2)
NOTES:
o
Any walls that this video wall solution is anchored to must be strong enough to support the displays and the
installation must be in accordance with any local building codes. All mounting apparatuses must make secure
contact to wooden studs.
Please read entire document before starting installation
o
NEC Display Solutions of America, Inc.
Rev 1.1
Advertisement
Related Manuals for NEC UN552S-TMX9P
Summary of Contents for NEC UN552S-TMX9P
- Page 1 NEC Display Solutions of America, Inc. QIG-TMX4P-552SVSV UN552S-TMX9P, UN552VS-TMX9P, UN552-TMX9P, UN552V-TMX9P Rev 1.1 Parts List o (4) UN552S , UN552VS, UN552, UN552V Displays o (4) Onsite Service Warranties (ONSITEMN-3Y-17) o (4) Peerless Pullout Wall Mounts (DS-VW775) o (1) Peerless Wall Mount Spacer (DS-VWRS090)
- Page 2 Connect the NEC display using the provided HDMI cables. Please note that in the picture below, the IN connection is on the right side of the display and circled in red while the OUT connection is located on the bottom of the display and circled in blue.
- Page 3 NEC Display Solutions of America, Inc. QIG-TMX4P-552SVSV UN552S-TMX9P, UN552VS-TMX9P, UN552-TMX9P, UN552V-TMX9P Rev 1.1 Screw the IR Receiver (KT-RC3) directly to the outside of the video wall and plug it directly into the IR In terminal of Display 1 as shown below.
- Page 4 NEC Display Solutions of America, Inc. QIG-TMX4P-552SVSV UN552S-TMX9P, UN552VS-TMX9P, UN552-TMX9P, UN552V-TMX9P Rev 1.1 If the control setup is as pictured below, each display does not need a unique IP address assigned to still control each individual monitor. Note that a unique IP address is not necessary to communicate to all displays if display 1 is not connected to a network.
- Page 5 NEC Display Solutions of America, Inc. QIG-TMX4P-552SVSV UN552S-TMX9P, UN552VS-TMX9P, UN552-TMX9P, UN552V-TMX9P Rev 1.1 If display 1 is connected to a network or LAN is going into display 1, like the picture below, each display will need a unique IP address to ensure that communication can successfully...
- Page 6 NEC Display Solutions of America, Inc. QIG-TMX4P-552SVSV UN552S-TMX9P, UN552VS-TMX9P, UN552-TMX9P, UN552V-TMX9P Rev 1.1 Ensure that video source is connected to the DisplayPort1 (Daisy Chain In) or the HDMI1 (Daisy Chain In) interface of display 1. Note that the DisplayPort (Daisy Chain Out) on each...
- Page 7 NEC Display Solutions of America, Inc. QIG-TMX4P-552SVSV UN552S-TMX9P, UN552VS-TMX9P, UN552-TMX9P, UN552V-TMX9P Rev 1.1 fills the entirety of the wall. Activating Auto Tile Matrix changes the Tile Matrix, Tile Matrix Mem, Input Signal, Video Out Setting and DisplayPort in the Terminal Settings menu.
- Page 8 NEC Display Solutions of America, Inc. QIG-TMX4P-552SVSV UN552S-TMX9P, UN552VS-TMX9P, UN552-TMX9P, UN552V-TMX9P Rev 1.1 If you are experiencing issues with this setup, please call our Technical Support number at (800) 632-4662...