Advertisement
All LEDs light
All LEDs light
All LEDs light
All LEDs light
All LEDs light
EDIT_PEDAL
EDIT_AMP
EDIT_CAB-OPTION
EDIT_MODULATION
EDIT_DELAY
EDIT_REVERB
EDIT_EXP-CTL-CHAIN
VAULE_1(GAIN)
VAULE_2(VR GAIN)
VAULE_3(TREBLE)
VAULE_4(MIDDLE)
VAULE_5(BASS)
VAULE_6(CH VOLUME)
BANK_DOWN_RED
BANK_UP_RED
(Channel) 1_RED
(Channel) 2_RED
(Channel) 3_RED
(Channel) 4_RED
C0NTROL_RED
Notice:* During check, push REVERB SELECT three times to exit the switch check and return to the
step1.
* NG occurs when detected the changing of the binary encoders (PEDAL,AMP TYPE).
Operation Check 4. Binary Encoder "BIN ENC"(LCD)
At the initial state "E1" is displayed in the BANK LED.
1. PEDAL TYPE select knob
* Adjust the knob at the top position (12:00), then rotate to clockwise.
* After one rotation and at the top position "E2" is displayed in the BANK LED.
2. AMP TYPE select knob
*Adjust the knob at the top position (12:00), then rotate to clockwise.
Notice:
*After started this check, when a switch pushed, the check stops and "SL" is displayed in
the BANK LED.
Operation Check 5. Volume with 11 clicks "C11 KNOB"(LCD)
1. MODULATION knob (Initial display BANK LED "C1")
From the MAX (right end) click of the MODULATION SELECT knob, the check begins like following
order. When the knob is already at the right end click, move one click once and set to
the right end click again.
13
AMP/LINE
14
WRITE
15
RENAME
16
EXIT/TUNE
17
GLOBAL
17
GLOBAL
17
GLOBAL
17
GLOBAL
17
GLOBAL
17
GLOBAL
17
GLOBAL
17
GLOBAL
17
GLOBAL
17
GLOBAL
17
GLOBAL
17
GLOBAL
17
GLOBAL
17
GLOBAL
18
BANK_DOWN
19
BANK_UP
20
(Channel) 1
21
(Channel) 2
22
(Channel) 3
23
(Channel) 4
24
C0NTROL
Advertisement
