There Are Problems With The Operation Of The Dishwasher; The Wash Result Is Not Satisfactory - AEG FAVORIT 88050 I User Instructions

...there are problems with the operation of the dish-
washer.
Malfunction
The programme does
not start.
Rust spots are visible in
the washing compart-
ment.
There is a whistling
noise during washing.
Dishwasher interior
lighting does not work.

...the wash result is not satisfactory.

The dishes are still dirty.
– The wrong wash programme was selected.
– The dishes were arranged in such a manner that water has not rea-
ched all parts. The dish racks must not be overloaded.
– The filter in the base of the washing compartment is dirty or incor-
rectly positioned.
– Detergent was not used or too little was used.
– In the case of scale deposits on the dishes: the special salt container
is empty or the water softener is incorrectly adjusted.
Possible Cause
The door of the dishwasher is
not closed properly.
Mains plug is not plugged in. Insert mains plug.
House fuse in defective.
In the case of dishwasher
models with start delay
timer:
A start delay is selected.
The washing compartment is
made of corrosion-resistant
stainless steel. Rust spots in
the washing compartment
are from particles from out-
side the appliance (rust par-
ticles from the water pipe,
from pans, cutlery, etc.).
Remove such spots with a
commercially available stain-
less steel cleaner.
The whistling is not a cause
for concern.
Mains plug is not plugged in. Insert mains plug.
Light bulb for the interior
lighting is defective.
Operating Instructions
Remedy
Shut the door.
Replace fuse.
If dishes are to be washed
immediately cancel delay
start timer.
Only wash cutlery and dis-
hes that are suitable for dis-
hwasher use.
Close the lid of the special
salt container securely.
Use a different brand of
detergent.
Contact customer service.
39