Canon PowerShot A95 User Manual page 106

Various Functions
When the print type
(p. 105) is set to [Index],
select an image using
the left or right button
and mark or remove
marks from images using
the up or down button. A
check mark appears on
the marked image.
You can press the zoom lever toward
use the same procedures to select images in
index playback (three images).
All the Images on a CF Card
Press the zoom lever
toward to switch to
index playback (three
images).
You can set one copy of
each image to print by
pressing the SET button,
then selecting [Mark all]
using the up or down
button, and pressing the
SET button again.
When the print type is set to [Standard] or
[Both], the setting for the number of print
copies can be changed for each image.
When [Index] is selected, the print settings
104
can be deleted. For the instructions on
changing settings, please reread Step 3 from
the beginning.
You can cancel all the settings by selecting
[Clear all].
4
Press the MENU button.
The setting will be complete and the Print
Order menu will reappear.
and
Images are printed in order from oldest
to newest by the shooting date.
A maximum of 998 images can be set.
When [Print Type] is set to [Both], the
number of copies can be set. When it is
set to [Index], the number of copies
cannot be set (only one copy will be
printed).
Print settings can also be assigned to
images with the bundled software
programs (ZoomBrowser EX or
ImageBrowser) on a computer.
However, do not set the date in the
DPOF print settings when printing
images that have had the date
embedded with the [Date Stamp]
function. This may cause the date to be
printed twice.