NAMCO OZ-1000 User Manual

NAMCO OZ-1000 User Manual

Ozone machine

Advertisement

Quick Links

Namco Ozone Machine
OZ-1000
USER MANUAL
CAUTION:
Read manual carefully for proper installation and operation.

Advertisement

Table of Contents
loading

Summary of Contents for NAMCO OZ-1000

  • Page 1 Namco Ozone Machine OZ-1000 USER MANUAL CAUTION: Read manual carefully for proper installation and operation.
  • Page 2: Table Of Contents

    CONTENTS Getting Started 1. Specifications ....................3 2. Product Features..................... 3 3. Introduction ..................... 4 4. Applications ..................... 5 How To Use 5. Quick Start Guide .................... 6 6. Operating ......................6 Care and Troubleshooting 7. Maintenance ....................6 8. Replacing the Fuse ..................7 9.
  • Page 3: Specifications

    1. SPECIFICATIONS Model: OZ-1000 AC 120V/60Hz; Rated Voltage: Power Consumption: Air Volume: Max 106 CFM(3 m /min) Ozone Plates 165X115mm, 3pcs ceramic ozone plates Active Oxygen(on): 1200mg/H Sound Level (DB): 40DB Product Size (mm): D 290 x W 230 x H 230 mm...
  • Page 4: Introduction

    3. INTRODUCTION The ozone machine is designed to remove odors in unoccupied spaces. It has a timer that will enable it to run for a maximum duration of 1 hours. The timer will then shut the commercial air purifier off. You should allow 40 minutes before returning to the treated area.
  • Page 5: Applications

    (Back View) Part Name Function Houses removable fuse. Fuse Holder (Spare fuse included, 1 Amp, 0.79 inch in length) Power Cord 110~120V or 220~240V grounded cord(unless otherwise). 4. APPLICATIONS  For home use: Air sterilizer, living room. Kitchen. Bathroom, pet room ...
  • Page 6: Quick Start Guide

    5. QUICK START GUIDE  When placing the device, set it on top of something solid to give it a steady base and prevent it from tipping over.  Make sure no humans, animals, pets are present in the area before starting the treatment ...
  • Page 7: Replacing The Fuse

    Rinse plate thoroughly in hot water and dry completely before reinstalling. A hair dryer may be used to dry the plate more quickly.  How to change a plate: When running the device, it has a burning smell, and/or appears to be arcing or sparking, then please remove and clean the ozone plates and reinstall;...
  • Page 8: 10. Service And Warranty

    If the UV light does not work, please contact the authorized dealer for service repairs. DO NOT disassemble the air purifier. 10. SERVICE AND WARRANTY The commercial air purifier comes with 3 Year Limited Warranty. Namco Manufacturing, Inc 9034 Long Point Rd. Bldg B.Houston,TX 77055 Tel: 713-932-8293 Fax: 713-932-9254 TOLL FREE: 1-800-634-5816 11.

Table of Contents