Rowenta EASY STYLIST KERATIN & SHINE SF6052K0 Quick Start Manual

SF6020KO_1800125119_A3 01/02/12 09:32 Page1
Please read the safety instructions before use
EN
1.GENERAL DESCRIPTION
A.Tongs
B. Led display: 5 temperature positions + temperature locking
C. -/+ button to reduce/increase temperature
D. ON/OFF switch
E. Straightening plates, CeramicTitanium coating
F . Rotating power cord outlet
G. Power supply cord
H. Lock System (to lock and unlock the tongs)
I. IONIC system
2. SAFETY INSTRUCTIONS
• For your safety, this appliance complies with the applicable standards
and regulations (Low Voltage Directive, Electromagnetic Compatibility,
Environmental...).
• The appliance's accessories become very hot during use. Avoid contact
with the skin. Make sure that the supply cord never comes into contact
with the hot parts of the appliance.
• Check that the voltage of your electricity supply matches the voltage of
your appliance. Any error when connecting the appliance can cause ir-
reparable harm, not covered by the guarantee.
• As an additional safety measure, we recommend the installation of a
residual current difference device in the electrical circuit supplying the
bathroom, acting at not more than 30 mA.Ask your installer for advice.
• The installation of the appliance and its use must however comply with
the standards in force in your country.
• Caution: Never use your appliance with wet hands or near water
contained in bath tubs, showers, sinks or other containers...
• When using the appliance in the bathroom, unplug it after use as the
presence of water nearby may pose a danger even when the appliance
is turned off.
• This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of expe-
rience and knowledge, unless they have been given supervision or ins-
truction concerning use of the appliance by a person responsible for
their safety. Children should be supervised to ensure that they do not
play with the appliance.
• If the supply cord is damaged, it must be replaced by the manufactu-
rer, its service agent or similarly qualified persons in order to avoid a
hazard.
• Stop using your appliance and contact an Authorised Service Centre if:
- your appliance has fallen.
- it does not work correctly.
• The appliance must be unplugged:
- before cleaning and maintenance procedures.
- if it is not working correctly.
- as soon as you have finished using it.
- if you leave the room, even momentarily.
• Do not use if the cord is damaged.
• Do not immerse or put under running water, even for cleaning pur-
poses.
• Do not hold with damp hands.
• Do not hold the appliance by the casing, which is hot, but by the
handle.
• Do not unplug by pulling on the cord, rather pull out by the plug.
• Do not use an electrical extension lead.
• Do not clean with abrasive or corrosive products.
• Do not use at temperatures below 0°C and above 35°C.
GUARANTEE:
Your appliance is designed for domestic use only. It should not be used
for professional purposes.The guarantee becomes null and void in the
case of improper usage.
3. BRINGING INTO SERVICE
1. Lock System (Fig. 1) :To open the clamps, pull the Lock System back.
To lock the clamps: close the clamps and push the "Lock System" to the
front.
2. Plug in the appliance.
3. Set the ON / OFF switch to position I. (D)
4.Your appliance will heat up very quickly (ready to use in less than 30
seconds) and the temperature will remain stable throughout use. (Fig. 2)
5. Select the ideal temperature for your hair using the -/+ buttons (Fig.
3): press the – button to reduce the temperature or the + button to in-
crease it. The temperature indicator flashes until the selected tempera-
ture is reached.
6. After use: Place ON/OFF (D) switch in the stop position (0), close the
clamps, use the "Lock System", unplug the appliance and leave it to cool
down completely before putting it away.
To help you decide the most suitable straightening temperature for
your hair, here's a guide:
•The temperature is displayed in green: from 130°C to 200°C (130 – 150 –
170 – 200) for fragile, fine, coloured or discoloured hair.
•The temperature is displayed in red: 230°C for healthy, resistant, robust
hair.
Note:To avoid any handling error (inadvertently pressing the +/- buttons
during use) this appliance is equipped with a locking function.
If you wish to lock your temperature setting during use, press the + or –
button for 2 seconds.Your setting is being locked, a padlock appears on
the screen
If you wish to change your appliance's temperature, you will need to un-
All manuals and user guides at all-guides.com
lock it by again pressing the + or – button for 2 seconds.Your setting is
being unlocked, the padlock disappears from the screen.
You can change the temperature by pressing the buttons +/-.
Automatic cut out:
For your safety the appliance will cut out automatically after 60 min. If you
wish to turn it on again follow the instructions given in SWITCHING ON.
4. USE
4.1 - How should you straighten your hair?
Hair must be untangled, clean and dry.
• Do not use the appliance on synthetic hair (wigs, extensions, etc.).
• Form a small lock a few centimetres in width, comb it and place it bet-
ween the plates. Hold the hair firmly between the plates and slide the ap-
pliance slowly from the roots to the tip of the hair.
• The ceramic coating on the plates protects your hair against overheating
by uniformly spreading the heat.
• Wait for the smoothed hair to cool down before styling.
4.2 - How should you curl, style your hair?
Professional hairdresser's technique for easy styling from the root to the
end of the hair.
1) Firmly clasp a section of hair between the plates, close to the roots.
(Fig. 4)
2) Whilst continuing to apply pressure on the hair section, gently turn the
hair section 180° upwards. (Fig. 5)
3) Slide from the hair root to the ends. (Fig. 6)
4) Remove the straightener, the curl will take shape.
5. MAINTENANCE
CAUTION! Always unplug your appliance and allow it to cool before clea-
ning it.
• To clean the appliance, unplug it and then wipe with a damp cloth and
dry with a dry cloth.
6. ENVIRONMENT PROTECTION FIRST
Your appliance contains valuable materials which can be
recovered or recycled.
Leave it at a local civic waste collection point.
7. IF YOU ENCOUNTER A PROBLEM
• You're not happy with the results you're getting from your straightener:
- Press the straightener plates more firmly against your hair
section.
- Slide your straightener more slowly.
- Increase the temperature using the "+" button.
• It's impossible to change the temperature?
- Check that the temperature level isn't locked.
• The top plate isn't static.
-This is quite normal, the straightener is fitted with a mobile plate to get
better results from your straightener.
• The straightener automatically switches itself off after a while:
-This is quite normal, this straightener has an automatic switch-off sys-
tem. Please refer to the paragraph on "automatic switch-off".
Fig. 1
E
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
A
B
I
C
D
H
F
G
www.rowenta.com