Onkyo TX-RZ840 Instruction Manual page 108

Output Zone:
With the cursors / , select the ZONE where you want to listen to the music.
"MAIN": Outputs audio only to the main room (where this unit is located).
"Zone 2": Outputs audio only to the separate room (ZONE 2).
"Main/Zone 2": Outputs audio to both the main room and separate room
(ZONE 2).
"Zone 3": Outputs audio only to the separate room (ZONE 3).
"Main/Zone 3": Outputs audio to both the main room and separate room
(ZONE 3).
"Zone 2/Zone 3": Outputs audio to both the separate rooms (ZONE 2 and
ZONE 3).
"Main/Zone 2/Zone 3": Outputs audio to the main room and both separate
rooms (ZONE 2 and ZONE 3).
Playing Sonos on This Unit
1. Select desired tracks using Sonos App and send the tracks to the room where
this unit is located (or to the group). It is recommended to give an easy-to-
remember name to the combination of this unit and Sonos Connect, such as
TV Room or Living Room where this unit is located.
• If the input selector of this unit is not automatically switched even after the
start of music playback, stop the playback once and start again.
• You can set the volume beforehand for playing back the Sonos Connect.
Press the button on the remote controller, and select "5. Hardware" -
"Works with SONOS" - "Preset Volume" (
Contents
p173) to make the setting.
Connections
≫
108
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫ ≫