Temperature Adjustment - Toto WASHLET TCF6632G NW1 Series Instruction Manual

Temperature Adjustment

Three different temperature levels (high / medium / low) and "OFF" setting can be made.
Displaying the temperature level of
the pressed button
Drying air temperature
(When you want to adjust the drying air temperature)
Adjusting the temperature
1
Select a temperature button you want to set from
· · and press it.
• The current temperature level appears.
2
Press the button selected in step
until a desired temperature level lights up.
The setting changes each time the button is pressed once
OFF LOW
OFF
The "DRYER" cannot be turned "OFF".
<Setting complete>
Note
• If the button is not pressed for about 10 seconds, the temperature adjustment LED will go off, but the setting
will be retained.
If the temperature adjustment LED goes out before the setting is completed, start all over again at step 1.
• When the toilet seat does not get warm, or when the warm water is not warm enough, even after temperature adjustment.
➞Is the energy saver set to "ON"? (Page 20)
18
Warm Water / Toilet Seat / Drying
Toilet seat temperature
(When you want to adjust the toilet seat temperature)
Warm water temperature
(When you want to adjust the warm water temperature)
When temperature is set
Lit
1
repeatedly
MEDIUM HIGH
Lit
Lit
To turn the warm water temperature and toilet seat temperature "OFF"
1
Select a temperature button you want to turn "OFF" from
·
• The current temperature level appears.
2
Press the button selected in step
until the temperature level is set to "OFF".
When "OFF" is set, the LED will go off.
The setting changes each time the button is pressed once
OFF
Lit
OFF
<Setting complete>
When "OFF"
OFF
and press it.
1
repeatedly
LOW MEDIUM
Lit
Lit
*The "DRYER" cannot be turned "OFF".
HIGH
Lit
19