Page 1
OWNER’S MANUAL MODEL NO. STARTING SERIAL #: L111-337001 RTB12544 RTB12544-CA RTB12544A RTB12544EC RTB12544 Shown RTB14544 RTB14544-CA RTB14544A RTB14544A-CA RTB14544EC 44” ROUGH CUT POL12544X POL12544X-CA TRAIL CUTTER POL12544XEX POL14544X POL14544X-CA POL14544XEX Assembly Operation Service and Adjustment Repair Parts Rev. 11-337...
Page 2
1-800-222-8183. The model number, serial number, date of purchase, and the name of the authorized Swisher dealer from whom you purchased the mower will be needed before any warranty claim can be processed.
Page 3
Thank you for choosing Swisher’s 44” Trailcutter. Before operating your cutter, please read, understand and follow all of the safety precautions and other instructions explained in this manual . As with all power equipment, lawn mowers,and cutters can be potentially dangerous if improperly used.
Page 4
• Turn off the blades when not cutting. Before leaving the machine, turn off the blades and stop the engine. • Watch for traffic when operating near or crossing roadways. • Do not operate the cutter if it has been dropped or damaged in any manner or if the mower vibrates excessively.
Page 5
OPERATING YOUR TRAILCUTTER The operation of any mower can produce foreign objects to be thrown into the eyes, resulting in severe eye damage. Always wear certified safety glasses or wide-vision safety goggles over spectacles before starting any cutting machine and while operating such a machine. The operation of any cutter produces sound waves that are damaging to the human ear.
Page 6
ENGAGING BLADES Note: Do not attempt to start the unit with the T-handle console in the ‘’ ENGAGED ’’ position. • Engage blades by pulling down the T-handle lever into the horizontal position. • Return lever to the vertical position to disengage blades. See detail on page 16 figure –...
Page 7
When offsetting the cutter do so to the side opposite the discharge of the tow vehicle. • Swisher recommends if the tow vehicle is equipped with a mid-mount mower to overlap the cut approximately 6”. This may vary depending on mowing terrain, obstacles, and/or tow vehicle. Always keep safety the first priority.
Page 8
• Reducing the travel speed will help cut dense growth. This allows the blades the time necessary to make its initial cut, and regain momentum to continue cutting and discharging debris properly. The engine may stall if you are mowing too fast! •...
Page 9
GENERAL TROUBLESHOOTING The unit is not cutting level. • Level deck. Check air pressure of all tires; make sure they are equal. See tires for maximum inflation. • Without the engine running, make certain blades are installed identically. The engine will not start. •...
Page 10
SAFETY AND OPERATIONAL DECALS Replace decal immediately if damaged. Order by part number from Swisher 1-800-222-8183, 8-5 CT M-F OD39-SWISHER FLAG DECAL OD82-44 RUGGED CUT DECAL OD33-5MPH DECAL OD29-DANGER DECAL OD36-Deflector Decal OD55-DANGER DECAL OD45-WARNING DECAL OD10-ENGAGE DECAL OD99112 LARGE SWISHER LOGO...
Page 11
FRONT SKIRT ASSEMBLY FIGURE 1 Item # Description Part # Bolt - Serr Flange, 1/4-20 X 3/4 GR5 ZY NB690 Washer - Fender, 1/4X1 1/4OD Gr 2 ZY 11520 Rubber Flapper 10384 Nut - Serr Flange, 1/4-20 Grade 5 ZY NB524 When ordering replacement parts * = USE PAINT CODE: TC=TEX.RED,S=SILVER,TK=TEX.BLACK...
Page 12
Item # Description Part # Crank Rod ES214 MOBILITY & COVER Bolt - 1/2-13 X 1 1/2 HCC GR5 ZY 10046 Single Point Pivot Block 4007TK ASSEMBLIES 1/2-13 2-Way Jam Lock Nut NB121 Washer - Bellville, .512x1.26x .138 GR2 10291 FIGURE 3 1/2-13 Jam Nut NB118...
Page 13
DECK ASSEMBLY Item # Description Part # Screw - .312-18 x .75 26X249 Side Gusset - Right 15057* FIGURE 4 Nut - 5/16-18 Serrated Flange NB170 Side Gusset - Left 15056* Deck - Weldment; RT44 15727* Bracket - Remote Cable Detent 15606* Weldment - Blade Mount 15005*...
Page 19
REPAIR PARTS Your 44’’ Trailcutter has been produced with components designed specific to this machine. Although standard V-belts, springs, bearings, blades, pulleys, hardware, etc. look similar to parts used on other machinery, they may in some cases be made of a different construction and/or materials.
Page 20
WHAT IS NOT COVERED: All failures caused by abuse, neglect, or improper maintenance is not covered. ADD-ON OR MODIFIED PARTS: The use of add-on or modified parts may be grounds for disallowing a warranty claim. Swisher is not liable to cover failures of warranted parts caused by the use of an add-on or modified part.
Page 21
Maintenance Log Date Oil Date Date Blades Notes Changed Changed Sharpen or Belts Changed...
Page 22
Maintenance Log Date Oil Date Date Blades Notes Changed Changed Sharpen or Belts Changed...
Page 23
Maintenance Log Date Oil Date Date Blades Notes Changed Changed Sharpen or Belts Changed...
Page 24
RTB12544-CA All mower parts listed herein may be ordered directly from RTB12544A Swisher or your nearest Swisher dealer. RTB12544EC All engine parts may be ordered from the nearest dealer of the engine supplied with your mower RTB14544...