Page 2
Board Iden�fica�on 36’’ A. Post Cap (1) Key (1) C. Rider Clip Kit (2) Cap (2) E. Sign Clip Kit (2) 36 inch Arm (1) Post (1) H. Stake (1)
Page 3
Box Contents List Step 1 Use a hammer to drive the For 4’’x4’’ Post For 4’’x4’’ Post For 2’’x3.5’’ Arm For 2’’x3.5’’ Arm Steel Anchor into gound. Make sure that anchor is Post Cap Arm Key Rider Clip Kit Arm Cap straight while hammering.
Page 4
Step 3 Step 5 Use a screwdriver and attached screws to fix the rider clips on Slide the key into the slots top of post arm. of the real estate post arm until it locks in place. This will secure the arm. Step 5 Step 4 Step 6...
Page 5
Hole distance option 1: 16’’ Up to 28 inch Hole distance option 2: Step 7 Step 7 20’’ Insert the sign clip screw through the arm, and then fix the screw. Note: You need to choose the right hole on the arm to fit the size of your signs Up to 28 inch...