Sony KDL-40Z5800 Instruction & Operation Manual page 118

Analogue Set-up
5 Press to select "Channel", then press
6 Press to select "S" (for cable channels) or
"C" (for terrestrial channels), then press
7 Tune the channels as follows:
If you do not know the channel number
(Frequency):
Press to search for the next available
channel. The search stops when a channel is
found. To continue searching, press
If you know the channel number (Frequency):
Press the number buttons to enter the channel
number of the broadcast you want to tune, or
the channel number of your VCR.
. 8 Press
Repeat the above procedure to preset other
channels manually.
.
• Label: Assigns a name of your choice to the
selected channel. This name appears briefly on
the screen when you select the channel.
To input characters, follow steps 2 to 4 in
"Programme Labels" (116).
• AFT: Allows you to fine-tune the selected
.
channel manually if you feel that a slight
tuning adjustment may improve picture quality.
When "On" is selected, fine tuning
adjustments are made automatically.
118/139
to jump to "Confirm", then press .