Analogue Set-up
4 Press
to exit the labeling procedure.
Intelligent Picture
• On with Indicator: Automatically reduces the
picture noise. The signal level bar is displayed
when the channel is changed or the display is
changed from an input screen to a TV
programme.
• On: Automatically reduces the picture noise.
• Off: Turns off the "Intelligent Picture" feature.
Manual Programme Preset
To preset a channel, press PROG +/– to select
the programme number, before selecting
"Label", "AFT", "Audio Filter", "Skip", "Decoder",
or "LNA". You cannot select a programme
number that is set to "Skip" (119).
• Programme/System/Channel: Allows you to
preset programme channels manually.
1 Press
.
2 Press
you want to manually tune (if tuning a VCR,
select channel 00), then press
3 Press
4 Press
broadcast systems, then press
B/G: For western European countries/areas
I: For the United Kingdom
D/K: For eastern European countries/areas
L: For France
117/139
to select "Programme", then press
to select the programme number
.
to select "System", then press
to select one of the following TV
.
.