Canon Oce VarioPrint 135 Manual page 30

Saddle Finisher-AF2 Table Continued
Item Specifications
No Collating, Collate, or Group Mode
Tray A:
If the High Volume Stack Mode is set to 'Off':
13" x 19", 12" x 18", 12 5/8" x 17 3/4", 11" x 17", LGL, LTR, LTRR, EXEC,
EXECR: 1,000 sheets (or 5 3/4" (147 mm) in height)
If the High Volume Stack Mode is set to 'On':
(The maximum stack volume may vary, depending on the paper type.)
LTR, LTRR, EXEC: 3,000 sheets (or 16 5/8" (423 mm) in height)
11" x 17", LGL: 1,500 sheets (or 8 1/2" (216 mm) in height)
Tray B:
LTR, LTRR, EXEC: 2,000 sheets (or 11 1/4" (285 mm) in height)
13" x 19", 12" x 18", 12 5/8" x 17 3/4", 11" x 17", LGL: 1,000 sheets
(or 5 3/4" (147 mm) in height)
Staple Mode
Capacity Per Tray
Tray A:
11" x 17", LGL, LTR, LTRR, EXEC: 1,000 sheets/100 sets
(or 5 3/4" (147 mm) in height)
Tray B:
LTR, LTRR, EXEC: 2,000 sheets/100 sets (or 11 1/4" (285 mm) in height)
11" x 17", LGL: 1,000 sheets/100 sets (or 5 3/4" (147 mm) in height)
No Collating, Collate, Group, and Staple Modes with Different Paper Sizes:
13" x 19", 12" x 18", 12 5/8" x 17 3/4", 11" x 17", LGL, LTR, LTRR, EXEC,
EXECR: 1,000 sheets/100 sets (or 5 3/4" (147 mm) in height)
- The Staple mode cannot be used with 13" x 19", 12" x 18", or 12 5/8" x 17 3/4"
Z-Fold Mode (When the Optional Paper Folding Unit-F1 Is Attached):
Tray A: 20 sheets
Tray B: 30 sheets
Version 7 Océ VarioPrint 135 Customer Expectations Document Page 30