Samsung SWL-2250U User Manual page 99

Hide thumbs Also See for SWL-2250U:
Table of Contents

Advertisement

Problem
The printer
The printer driver may
does not print.
be incorrectly
(continued)
installed.
The printer is
malfunctioning.
Printer selects
The paper source
materials from
selection in the printer
the wrong
properties may be
paper source.
incorrect.
Paper does not
Paper has not been
feed into the
loaded correctly.
printer.
There is too much
paper in the tray.
The paper is too thick.
Print job is
The job may be very
extremely
complex.
slow.
If using Windows 9x/
Me, the Spooling
Setting may be set
incorrectly.
Half the page
The page layout is too
is blank.
complex.
The page orientation
setting may be
incorrect.
The paper size and
the paper size settings
do not match.
6.4
S
P
OLVING
ROBLEMS
Possible Cause
Solution
Reinstall the printer driver; see
page 2.12. Try printing a demo page.
Check the LEDs on the control panel to
determine if the printer is indicating a
system error.
For many software applications, the paper
source selection is found under the Paper
tab within the printer properties. Select
the correct paper source. See page 4.6.
Remove paper from the tray and reload it
correctly.
Remove excess paper from the tray.
Use only paper that meets the
specifications required by the printer.
Reduce the complexity of the page or try
adjusting the print quality settings.
The maximum print speed of the printer
is 16(A4) or 17(Letter) pages per minute.
From the Start menu, choose Settings
and Printers. Right-click the Samsung
ML-1750 Series printer icon, choose
Properties, click the Details tab, and
then choose the Spool Settings button.
Select the desired spool setting.
Simplify the page layout and remove any
unnecessary graphics from the document.
Change the page orientation in your
application.
Ensure that the paper size in the print
settings matches the paper in the tray.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ml-1750

Table of Contents