Selection Of Standard Information Numbers In Control Direction; System Functions In Control Direction; General Commands In Control Direction; Generic Functions In Control Direction - Siemens SIPROTEC 7SJ61 Manual

2.3.4

Selection of standard information numbers in control direction

2.3.4.1

System functions in control direction

INF Semantics
<0> Initiation of general interrogation
<0> Time synchronization
2.3.4.2

General commands in control direction

INF Semantics
<16> Auto-recloser on/off
<17> Teleprotection on/off
<18> Protection on/off
<19> LED reset
<23> Activate characteristic 1
<24> Activate characteristic 2
<25> Activate characteristic 3
<26> Activate characteristic 4
2.3.4.3

Generic functions in control direction

INF Semantics
<240> Read headings of all defined groups
<241> Read values or attributes of all entries of one group
<243> Read directory of a single entry
<244> Read value or attribute of a single entry
<245> General interrogation of generic data
<248> Write entry
<249> Write entry with confirmation
<250> Write entry with execution
<251> Write entry abort
2.3.5

Basic application functions

Test mode
Blocking of monitor direction
Disturbance data
Generic services
7SJ61 / 7SJ62 / 7SJ64 Bus mapping
C53000-L2540-A306-2
IEC 60870-5-103 Interoperability
23