Checking The Depth Of Field And Exposure - Canon EOS 450D Instruction Manual

Focusing Using FlexiZone-Multi
REBELT4i 650D
This AF mode allows focus to be easily achieved on moving subjects.
You can adjust focus over a wide area, and also divide the area into
zones for focusing.
1
Select [FlexiZone-Multi] from the [Focus] list box.
An AF point appears.
You can click in the window to select an AF zone.
To cancel a selected zone, select [FlexiZone-Multi] again from
the [Focus] list box.
You can set continuous AF to on/off with the [Continuous AF]
box. When shooting movies, the [Continuous AF] box changes to
the [Movie servo AF] on/off box.
You can switch between showing and hiding the AF point by
clicking the [ ] button.
2
Click the [ON] button on the [Focus] list box.
AF is executed.
When focus is achieved, the camera makes a beeping sound
and the AF point turns green.
If focus is not achieved, the AF point turns red.
The number of AF points and zones depend on the selected
aspect ratio and the image being shot (still image/movie).

Checking the Depth of Field and Exposure

You can check the depth of field and exposure in the [Remote Live View
window].
Click the [ON] button.
The aperture value (exposure simulation) is set in the capture
window (p.91).
Introduction
Contents at
a Glance
1
Downloading
Images
2
Camera
Settings
3
Remote
Shooting
4
Preferences
Reference
Index
40 40