Canon EOS 450D Instruction Manual page 33

7
Click the [ ] button to shoot.
The shot image is transferred to your computer and displayed in
the [Quick Preview] window. And then, DPP starts up
automatically.
You can quickly review the shot image in the [Quick Preview]
window displayed before DPP starts up. You can also resize the
[Quick Preview] window.
You can show/hide the [Quick Preview] window by clicking the
[Other Functions] button in the capture widow and selecting
[Quick Preview] from the menu that appears.
You cannot perform RAW processing. If you connect the camera
to your computer during in-camera RAW processing, the camera
and computer will connect after you finish processing.
On
REBELT4i 650D
60D
you cannot set [Creative Auto].
You can also shoot using the <space> bar on the keyboard.
REBELT3i 600D REBELT3 1100D
You cannot operate the camera when the [Remote Live View
window] is displayed. Pressing the Live View shooting button (the
camera's <SET> button on the
1D Mk IV 1Ds Mk III 1D Mk III
40D REBELXSi 450D REBELXS 1000D
Live View image on the camera's LCD monitor, allowing you to
view the image while operating the camera.
You can shoot by operating the capture window, even if the
[Remote Live View window] is not displayed.
To perform exposure simulation (p.40)
window] or enable display of histograms (p.95), set your camera's
Custom Function [Live View exposure simulation] to [Enable]. On
1D X 1D Mk IV 5D Mk III 5D Mk II
set [Exposure simulation] in the menu to [Enable].
On
1D X 1D Mk IV 5D Mk III 5D Mk II
REBELT4i 650D REBELT3i 600D
also use mirror lockup with remote shooting. (You cannot take
test shots after setting mirror lockup.)
On
1D X 5D Mk III REBELT4i 650D
possible.
With , mirror lockup and Silent single shooting
1Ds Mk III 1D Mk III
cannot be performed in remote shooting.
The [Test Shooting] window appears when you click the [Test
shooting] button.
During flash shooting, you can take a test shot under the same
conditions as an actual shot, and adjust the white balance based
on the shot test image (p.41).
You can save shot images to both your computer and a memory
card by checkmarking [Save also on the camera's memory card]
in preferences ([Remote Shooting] window) (p.76).
You can change the software that starts up automatically when
remotely shot images are transferred to your computer from DPP
to ImageBrowser EX or other software in preferences ([Linked
Software] window) (p.77).
For a list of the [Remote Live View window] functions, see p.95.
For a list of the [Zoom View] Window functions, see p.97.
) will also display the
with [Remote Live View
,
7D 60D 50D
7D 60D 50D
, you can
REBELT2i 550D
, self-timer shooting is
Introduction
Contents at
a Glance
1
Downloading
Images
2
Camera
Settings
3
Remote
Shooting
4
Preferences
Reference
Index
32 32