Table of Contents
Advertisement
Adjusting the luxury head restraints
G
Risk of injury
When folding back the head restraint side bol-
sters, do not put your hands between the side
bolster and the cushion holder. There is a
danger of becoming trapped.
To adjust the side bolsters of the head
X
restraint: push or pull right and/or left-
hand side bolster : into the desired posi-
tion.
To adjust the angle of the head
X
restraint: push or pull the head restraint in
the direction of arrow ;.
Rear seat head restraints
Adjusting the rear seat head restraint
angle
Adjust the head restraint so that it is as close
as possible to your head.
Pull or push the top of the head restraint
X
until it is in the desired position.
Removing and fitting the rear seat head
restraints
G
Risk of injury
Occupants should only travel sitting on seats
which have the head restraints installed. This
reduces the risk of injury to the passengers in
the rear in the event of an accident.
! Make sure that the rear window roller
sunblind is retracted when removing the
rear head restraints. Otherwise, you could
damage the roller sunblind.
To remove: pull the head restraint up to
X
the stop.
Press release catch : and pull the head
X
restraint out of the guides.
To refit: insert the head restraint so that
X
the notches on the bar are on the left when
viewed in the direction of travel.
Push the head restraint down until you hear
X
it engage in position.
Adjusting the multicontour seat
You can adjust the contour of the front seats
individually so as to provide optimum support
for your back and sides.
Seats
87
Z
Advertisement
Table of Contents
