Table of Contents
Advertisement
CUSTOMIZING TV SETTINGS
Initial Setup
Connect the power cord to the power socket after you have completed all the physical
connections. At this stage, the TV will enter Standby Mode and the red LED indicator will
illuminate.
In Standby Mode, press the
on. The red LED indicator will turn blue.
highlight and select your desired mode and press OK
Home Mode :The picture mode will be Standard if you select this mode.
Retail Mode: Select Dynamic Mode if you would like your picture to be brighter. At times this
mode may use more energy to operate the Volume/Sound Mode and the Picture Mode.
SOURCE
10
En
button on the main unit or on the remote control to turn the TV
‡ If channels cannot be
7
found, this frame will be
displayed automatically.
‡ The SLEEP-MODE Power should
be less than 0.5 W.
Press SOURCE on the remote control or on the main unit to
display the source menu, then use the Arrow buttons to cycle
among the different input sources: TV/AV/COMPONENT/HDMI1/
HDMI2/HDMI3/VGA/USB, then use the Arrow buttons to highlight
and press OK to confirm.
the Arrow buttons to
5
Advertisement
Table of Contents
