Customizing Tv Settings; Initial Setup; Source - Westinghouse WD40FE2210 User Manual

CUSTOMIZING TV SETTINGS

Initial Setup

Connect the power cord to the power socket after you have completed all the physical
connections. At this stage, the TV will enter Standby Mode and the red LED indicator will
illuminate.
In Standby Mode, press the
on. The red LED indicator will turn blue.
highlight and select your desired mode and press OK
Welcome to the Westinghouse
Westinghouse
TV Setup Wizard .
Follow this guide to help setup
your TV to scan channels or
access your external devices
like your Antenna,Set-Top Box,
Blu-ray,DVD,Gaming systems
or other devices.
Use the UP or DOWN arrows on
your remote control or TV
keypad to select the language
on screen menu.
CONNECT A BLU-RAY, DVD, OR OTHER DEVICES
SCAN CHANNELS FROM THE ANTENNA OR COAXIAL CABLE
INPUT

SOURCE

7
Home Mode :The picture mode will be Standard if you select this mode.
Retail Mode: Select Dynamic Mode if you would like your picture to be brighter. At times this
mode may use more energy to operate the Volume/Sound Mode and the Picture Mode.
10
En
button on the main unit or on the remote control to turn the TV
DATA COLLECTION AND FIRMWARE UPDATES
NOTICE
When this television is connected to the internet, it will
collect limited, non-personally identifiable information
which will be sent to MStar Semiconductor Inc. ("MStar")
and its service providers. Certain of this information may
be aggregated and shared with third party partners for
business and product analysis purposes. By clicking
"Accept" you acknowledge and agree to the collection
and shareing of this information as described in more
detail in the " View Additional Details " section, as well as
the automatic download of essential firmware/software
updates.
[ VIEW ADDITIONAL DETAILS ] [ ACCEPT ]
If channels cannot be
found, this frame will be
displayed automatically.
The SLEEP-MODE Power should
Press SOURCE on the remote control or on the main unit to be less than 0.5 W.
display the source menu, then use the Arrow buttons to cycle
among the different input sources: TV/AV/COMPONENT/HDMI1/
HDMI2/HDMI3/VGA/USB, then use the Arrow buttons to highlight
and press OK/SOURCE to confirm.
the Arrow buttons to
Use the UP and DOWN arrows
on your remote control or TV
keypad to select your local time
zone.
5