Displaying The Overlay - Canon PowerShot A1100 IS User Manual

Displaying the Overlay

You can display gridlines for vertical and horizontal guidance, or a 3:2 guide
to confirm the printable area for L size or postcard size prints.
•
In mode, you cannot set [3:2 Guide] or [Both].
•
Grid Lines will not be recorded on the image.
•
The gray areas displayed with [3:2 Guide] are the areas that will not be
printed. The actual image recorded will include the portion in the gray
areas.
Changing the IS-Mode Settings
•
If camera shake is too strong, attach the camera to a tripod. It is
recommended to set the IS Mode to [Off] when the camera is fixed to a
tripod.
•
When using [Panning], hold the camera horizontally. Image stabilization
does not work when the camera is held vertically.
Select [Disp. Overlay], then press the qr
●
buttons to select an option.
Grid Lines A grid overlays the display.
Gray areas appear at the top and
bottom of the screen. These areas
3:2 Guide
will not print when printing on 3:2
aspect ratio paper.
Both grid lines, and the 3:2 guide will
Both
display.
Select [IS Mode], then press the qr buttons to
●
select an option.
Image stabilization is always on. You
can confirm the result directly on the
Continuous
display, which makes it easier to
check the composition or focus.
Image stabilization is only active at
Shoot Only
the moment of shooting.
Image stabilization only counters up
and down motion. This option is
Panning
recommended for shooting objects
moving horizontally.
Changing Shooting Functions
111