Before Use; Quick Guide - Panasonic Palmcorder Multicam PV-GS33 Operating Instructions Manual

Quick Guide

1
Attach the Battery to the AC Adaptor and
charge it.
≥Before use, fully charge the Battery.
≥Since the Battery will not be charged when
the DC Cable is connected to the AC
Adaptor, disconnect it from the AC Adaptor.
≥The [CHARGE] Lamp lights up, and charging
starts.
≥When the [CHARGE] Lamp goes off,
charging is completed.
2
Attach the charged Battery to the
Camcorder.
ª Inserting a Cassette
1
Slide the [OPEN/EJECT] Lever 1 toward
the front and pull down to open the
Cassette Compartment Cover.
2
Insert a Cassette.
3
Close the Cassette Holder by pressing the
[PUSH] mark 2.
4
Close the Cassette Compartment Cover.
2
PUSH

Before Use

ª Recording on a Tape
1
Set the [OFF/ON] Switch 1 to [ON].
≥The [POWER] Lamp 2 lights up.
2
Set the Mode Dial to Tape Recording Mode.
3
Press the Recording Start/Stop Button.
≥Recording starts.
4
Press the Recording Start/Stop Button
again to pause the recording.
ª Recording a Still Picture (Photoshot)
1
Set the Mode Dial to Tape Recording Mode.
2
Press the [PHOTO SHOT] Button in the
Recording Pause Mode.
1
-8-
ON
1
POWER
2
PHOTO SHOT