Table of Contents
Advertisement
Editing Mode
Copying onto a DVD Recorder or
a VCR ( Dubbing)
Pictures recorded by the Camcorder can be stored
on a DVD-RAM or other such media. Refer to the
instructions for the recorder.
• Place a recorded cassette in the Camcorder,
and an unrecorded DVD-RAM or cassette in
the DVD Recorder or VCR.
1
Connect the Camcorder and the Recorder.
Connecting with the AV Cable
• Connect the Camcorder and the Recorder by
using the AV Cable
Connecting with the optional DV
cable (Only for equipment with a DV
terminal)
2
Turn on the Camcorder and set to Tape
Playback Mode.
3
Select the input channel on the TV set and
recorder.
[VIDEO IN]
[AUDIO IN]
1
A/V
1
.
4
Move the Joystick Control
[▲] to start playback.
• The image and sound are
reproduced.
5
Start recording.
6
Move the Joystick Control [▼] to stop
playback.
7
Stop recording.
• For more information, refer to the operating
instructions for your TV set and recorder.
When neither image nor sound from
the Camcorder is output to the TV set
• Check that the plugs are inserted as far as they
go.
• Check the [12bit AUDIO] settings.
• Check the connected terminal.
Using the DV Cable for Recording
(Digital Dubbing)
By connecting this Camcorder with other digital video
equipment (such as another Camcorder of the same
format/model) that has a DV input/output Terminal,
and using a 4-pin to 4-pin DV Interface Cable
PV-DDC9 (optional)
, high quality images and
1
sounds can be dubbed in the digital mode.
• Set to Tape Playback Mode
(Player/Recorder)
1
Connect the Camcorder and digital video
equipment with the DV cable.
Player/Recorder:
2
Insert the Cassette and set to Tape
Playback Mode.
Player:
3
Move the Joystick Control [▲] to start
playback.
Recorder:
4
Set [
ADVANCED] >> [
>> [YES], then move the Joystick Control
[▲] to select [
].
• Recording starts.
S P
3 h 5 9 m 5 9 s 2 9 f
1 2 : 3 4 : 5 6 A M
J A N
2
2 0 0 6
[One-Touch Navigation icon]
1
REC STDBY]
R
2 : 0 0
1 0 0
45
Hide quick links:
Advertisement
Table of Contents
