Panasonic PV-GS36 Operating Instructions Manual page 27

2
Set the Mode Dial to Card Recording
Mode.
• The [ CARD RECORDING MODE] is
displayed on the screen.
3
Press the [PHOTO SHOT] Button.
• The [ ] Indication lights up in red.
Recording with a shutter operation
effect
You can add a shutter operation simulating sound.
1
Set [ ADVANCED] >> [
>> [ON].
Selecting the quality of Photoshot
images
1
Set [ BASIC] >> [
[ (High Picture Quality)] or [
Picture Quality)].
• You can also change the picture quality on [
ADVANCED] >> [
Tape Recording Mode.
Maximum number of still pictures
recordable on an SD Memory card
(optional)
PICTURE QUALITY
32 MB
64 MB
128 MB
256 MB
512 MB
1 GB
2 GB
• The numbers shown in the table are
approximations.
• These figures vary depending on the subject being
photographed.
SHTR EFFECT]
PICT.QUALITY] >>
(Normal
PICT. QUALITY] in the
(High) (Normal)
220 440
440 880
880 1 760
1 760 3 520
3 520 7 040
7 040 14 080
14 080 28 160
On-screen display in the Card
Recording Mode
1 2 : 3 4 : 5 6 A M
J A N 2 2 0 0 6
1) Still picture size
2) Quality of still pictures
3) Number of recordable still pictures (When no
pictures can be recorded, the red light will
flash.)
To record still pictures clearly
• When zooming in on the subject with a
magnification of 4× to 10× or higher, it is difficult
to reduce the slight hand shaking from holding
the Camcorder. We recommend decreasing the
zoom magnification and approaching the subject
when recording.
• When recording still pictures, hold the
Camcorder firmly with your hands and keep your
arms stationary at your side so as not to shake
the Camcorder.
• You can record stable pictures without hand
shaking by using a tripod.
Notes:
• Even if the [ SHTR EFFECT] is set to [ON], the
Shutter Effect cannot be recorded on the picture.
• When the color of the screen changes or blurs,
adjust the shutter speed manually to 1/60 or 1/100.
• Photoshot Recording results in slightly inferior
image quality.
• For the number of still pictures to be recorded on a
card, refer to page 27.
• The sound cannot be recorded.
• While data is being recorded on a card, do not
operate the Mode Dial.
• When the Access Lamp is lit, do not insert or
remove a card.
• Another product may degrade or not play back data
recorded on this Camcorder.
• If set [ PICT. QUALITY] >> [
noise may appear on a playback image depending
on the picture content.
1)
1 0 0
2) 3)
], mosaic-pattern
27