Husqvarna CES342B Owner's Manual page 7

5
LOWER CHUTE - MOWER WITH
MOUNTING TAB (See Fig. 5A)
1. Raise and hold defl ector shield in upright position.
2. Place slot in lower chute over mounting tab on mower and
position lower chute over mower opening as shown.
3. Hook rear latch into fl ange hole on back of mower.
4. Hook front latch into tab hole on front of mower.
• If your tractor is equipped with gauge wheels on the
deck, then it will be necessary to hook the rear latch
into the hole in the R.H. gauge wheel bracket.
CAUTION: Do not remove defl ector
shield from mower. Raise and hold
shield when attaching lower chute
and allow it to rest on chute while in
operation.
REAR GAUGE
WHEEL
BRACKET
WITH REAR
GAUGE WHEELS
REAR LATCH
DEFLECTOR SHIELD
HINGE BRACKET
DEFLECTOR
SHIELD
03058
WITHOUT
GAUGE WHEELS
FIG. 5A
7
MOUNTING TAB
FRONT
LATCH
REAR LATCH