TP-Link RE500X Quick Installation Manual page 2

Access Extender Settings
After setup, you can access extender settings via any of the methods below.
You can reselect host network, change extended network settings and more.
Note: If your extender and router use the same network name, Method 1 is recommended.
Method 1: Via the Tether App
1. Connect your smartphone to the extender's or router's network.
2. Launch the Tether app, select your extender, and log in.
3. View or change extender settings as needed.
Method 2: Via a Web Browser
1. Connect your computer or smartphone to the extender's network. If you are
using a computer, unplug the Ethernet cable if any.
2. Launch a web browser, enter http://tplinkrepeater.net in the address bar, and
log in.
3. View or change extender settings as needed.
LED Explanation
LED Status Indication (For Range Extender Mode)
On/Off
The extender is on or off.
(Power)
Blinking The system is starting up or firmware upgrade is in progress.
The extender is connected to your router's wireless
Solid blue
network and is in a suitable location.
The extender is receiving a weak signal. Try relocating it
Solid red
closer to your router.
(Signal)
Blinking WPS connection is in progress.
No wireless connection is established.
Off
The extender is connected or not connected to the 2.4GHz
2.4GHz On/Off
wireless network of your router.
The extender is connected or not connected to the 5GHz
5GHz On/Off
wireless network of your router.
Q1. What should I do if the Tether app cannot find my device during
setup?
Try another method by following the steps below:
1. Connect your smartphone to the extender's network TP-Link_Extender.
< Settings
Wi-Fi
CHOOSE A NETWORK...
TP-Link_Extender
Other...
2. Launch the Tether app, and select your extender.
Tip: If you have connected to the extender's Wi-Fi but still cannot find your device, try turning off
your cellular data.
3. Follow app instructions to complete the setup.
If you are still having problems, contact our technical support.
Q2. What should I do if the
completing setup via the Tether app or web browser?
You may have entered incorrect Wi-Fi password for your host router during the
configuration. Check the password and try again.
Make sure the extender is close to your router, preferably within 16 feet, and away
from large electrical appliances.
If you have enabled wireless MAC filtering, wireless access control, or access
control list (ACL) on your router, disable them first, then follow any method on the
front page to complete the configuration.
Try setting it up via the WPS button.
Reset the extender and go through the configuration again.
If you are still having problems, contact our technical support.
Wi-Fi
My Devices
Local Device
RExxx
XX-XX-XX-XX-XX-XX
LED doesn't turn solid on after
OneMesh with Seamless Roaming
TM
TP-Link OneMesh router and extenders work together to form one unified Wi-Fi
network. Walk through your home and stay connected with the fastest possible
speeds thanks to OneMesh's seamless coverage.
Network Name & Password
for seamless roaming
Unified Wi-Fi Network
Router and extenders share the same wireless settings, including network name, password,
access control settings and more.
Seamless Roaming
Devices automatically switch between your router and extenders as you move through your
home for the fastest possible speeds.
Easy Setup and Management
Set up a OneMesh network with a push of WPS buttons. Manage all network devices on the
Tether app or at your router's web management page.
To check full list of TP-Link OneMesh devices, scan the QR code,
or visit https://www.tp-link.com/onemesh/compatibility.
Q3. How do I reset the extender?
With the extender powered on, use a pin to press the Reset button for 1 second.
The extender will reboot.
Safety Information
Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please
contact us.
Do not use the device where wireless devices are not allowed.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Please read and follow the above safety information when operating the device. We cannot
guarantee that no accidents or damage will occur due to improper use of the device.
Please use this product with care and operate at your own risk.
TP-Link hereby declares that the device is in compliance with the essential requirements
and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and
(EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.
To communicate with TP-Link users or engineers, please join the
TP-Link Community at https://community.tp-link.com.
If you have any suggestions or needs for our product guides, you
are welcome to email techwriter@tp-link.com.cn.
SAME
Reset