Setting The Microphone Level - PRESONUS REVELATOR IO24 Owner's Manual

2.5

Setting the Microphone Level

Power User Tip: If your input level is too loud, the clip indicator will display in red above the input level meter.
This means that your input signal is clipping, and will begin to sound distorted. If your input signal clips, it will
overload the analog-to-digital converters and cause digital distortion. Digital distortion sounds terrible, and can-
not be undone if recorded. Because of this, it's important to keep your eye on this indicator while you're setting
your levels. Check out Section 9 for other recording tips.
2.5 Setting the Microphone Level
To set your Revelator io24's input level, press the Channel
button for the Channel you would like to use. Next, press the
encoder to cycle through the available options. A yellow
underline will indicate the currently-selected option. Once
you've selected the Gain setting—it's shown below the Chan-
nel indicator number and measured in dB (decibels)—turn the
Encoder to set the desired gain level.
19