Changing Soundtracks/Dialogue Enhancer/Skipping About One Minute Forward/Reducing Noise In Pictures/Transfer Mode/Zoom; Dialogue Enhancer - Panasonic DVD-S54S Operating Instructions Manual

Changing soundtracks
(with multiple soundtracks)
DVD-V DivX
DVD-VR VCD
DVD-V DivX
Press [AUDIO] to select the soundtrack.
DVD-VR VCD
You can use this button to select "L", "R", "L4R" or "L R".

Dialogue enhancer

(Dolby Digital, DTS, 3-channel or over, with the dialogue
DVD-V
recorded in the center channel)
DivX (Dolby Digital, 3-channel or over, with the dialogue
recorded in the center channel)
To make the dialogue in movies easier to hear
Press [DIALOGUE ENHANCER] to select "ON".
To cancel, press [DIALOGUE ENHANCER] to select "OFF".
• The settings remain even when the unit is turned off or the disc tray is opened.
Skipping about one minute forward
DVD-V DVD-VR
Convenient when you want to skip commercials etc.
During play, press [CM SKIP].
• This may not work depending on the play position.
• Does not work:
DVD-VR
– with still picture part.
– when playing a playlist.
Reducing noise in pictures
Smoothes block noise and reduces the smudging that appears
around contrasting sections of the picture.
Press [DNR] to select "OFF", "1", "2", or "3".
1: Light effect
2: Medium effect
3: Strong effect
OFF: Off
e.g.
DivX
1: MP3 160kbps 44.1kHz 2ch
ON
1
Transfer mode
(Discs with pictures)
With COMPONENT VIDEO OUT connection
If you have set "VIDEO OUT (I/P)" to "PROGRESSIVE"
( page 18, "VIDEO" menu).
Press [TRANSFER MODE] to select the method of conversion for progressive
output to suit the type of material.
• When the tray is opened, the setting will return to AUTO1.
AUTO1 (normal): Automatically detects the film and video content, and appropriately
converts it.
AUTO2: In addition to AUTO1, automatically detects film contents with different frame
rates and appropriately converts it.
VIDEO: Select when using AUTO1 and AUTO2, and the content is distorted.
With HDMI AV OUT connection
If you have set "VIDEO FORMAT" to "480p", "720p", "1080p", or "1080i"
( page 17, On-Screen Menu 4).
Select between AUTO1, AUTO2, and VIDEO for the method of conversion for
progressive output.
Zoom
DVD-V DVD-VR
1. Press [ ].
h
JPEG
2. Press [ZOOM] to select the zoom ratio.
(
NORMAL AUTO DVD-V DVD-VR
NORMAL: Displayed in the size used for recording.
AUTO: Automatically zooms in and adjusts the size of images with upper and lower
black bands.
X 2: 2X zoom
X 4: 4X zoom
• Zoom ratio will return to "NORMAL" while stopped, "RESUME STOP", or when the
disc tray is opened.
AUTO1
VCD JPEG MPEG4 DivX
NORMAL
only )
VCD X 2 X 4
e.g.
VCD
15 15