Capture Settings - GoPro HERO3 Manual

8. Press [S].
Note: Certain combinations of Resolution and FPS are not possible. See
gopro.com/support for additional information on video resolutions.
CHANGING BURST RATE –
[burst icon] Burst mode produces a rapid-fire series of 3 photos in 1 second.
CHANGING TIME LAPSE MODES
[time lapse icon] Several time interval settings are available for Time Lapse mode
photos, including 0.5, 1, 2, 5, 10, 30 and 60 seconds. After selecting the interval,
specify whether to optimize for VIDEO or STILLS
[settings icon] Verify camera is in Settings menu. If it is not showing, press [mode]
repeatedly until it appears:
1. Press [S] to enter Settings menu.
2. Use [mode] to cycle through Settings menu to locate Time Lapse.
3. Press [S] to select and enter the sub-menu with customization options.
4. Use [mode] to cycle through the options.
5. Press [S] to select a highlighted option.
6. To exit after making a selection, use [mode] to cycle to [EXIT].
7. Press [S].

CAPTURE SETTINGS

Upside Down Video/Photo
[upside down icon] Mounting the camera upside down but wish the files to appear
upright when viewing or transferring?
[TABLE]
[icon] Camera is right side up (default)
[icon] Camera is upside down
[settings icon] To change camera orientation, verify that the camera is in Settings
menu. If it is not showing, press [mode] repeatedly until it appears:
1. Press [S] to enter Settings menu.
2. Use [mode] to cycle through Settings menu to locate Up Down.
3. Press [S] to enter Up Down sub-menu.
4. Use [mode] to cycle through options and select highlighted by pressing [S].
5. To exit [mode] to cycle to [EXIT], then press [S].
Spot Meter
The recommend setting for videos is ON; for still photos is OFF
6
.
6