Setting The Time And Local Settings; Adjusting The Cec Settings; Adjusting The Power Mode - Vizio P Series User Manual

Setting the Time and Local Settings

To ensure the correct time is displayed when you press the INFO button, set the
TV's time zone:
Menu > System > Time & Local Settings > Time Zone
To turn Daylight Saving Time on or off:
1 . Highlight Daylight Saving Time and press OK . The Daylight Saving Time menu
is displayed .
2 . Choose On if it is currently Daylight Savings Time, Off if it is Standard Time, or
Auto to have the system automatically detect Daylight Savings Settings .

Adjusting the CEC Settings

The CEC function on your TV enables you to control devices connected to HDMI
(ARC) input with the included remote, without any programming . Using CEC, your
VIZIO TV remote can control:
• Power On/Off
• Volume
• Mute
WARNING: Not all HDMI devices support CEC . See your device's user
manual for details .
To enable, disable, or adjust CEC settings:
Set up your audio device and connect it to the HDMI-1(HDMI Arc) input on the TV .
On your audio device, select the HDMI ARC input .
Menu > System > CEC
Select a setting and then press OK .
• CEC — To use CEC, you must select Enable .
Device Discovery — To determine if your device is connected and supports
•
CEC, select Device Discovery and then press OK .

Adjusting the Power Mode

Your TV is set to Eco Mode by default. When the TV is powered off, the Eco Mode
setting uses less than 0 .5W of power . Quick Start Mode enables your display to
power on faster and also to turn on when powered from another device (such as
when you are casting onto the TV) .
WARNING: Please note that by changing this setting the energy
consumption required to operate this device will change .
To switch between Eco Mode and Quick Start Mode:
Menu > System > Power Mode
Highlight either Eco Mode or Quick Start Mode and press OK .
3
30