Setting The Auto Rotate Function - Canon pmn Advanced User's Manual

Using the
1
Press the
Each time that the
the registered functions are switched.
For
corresponding setup screen is displayed.
When there are functions not available in the current
shooting mode, pressing

Setting the Auto Rotate Function

Shooting Mode
Your camera is equipped with an Intelligent Orientation sensor that
detects the orientation of an image shot with the camera held
vertically and automatically rotates it to the correct orientation when
viewing it in the LCD monitor.
1
(Set up) Menu
[Off].
* Default setting.
When the Auto Rotate function is set
to [On] and the LCD monitor is set to
the detailed display mode during
shooting,
is down) or
This function may not operate correctly when the camera
is pointed straight up or down. Check that the arrow
pointing in the right direction and if it is not, then set the
Auto Rotate function to [Off].
Even if the Auto Rotate function is set to [On], the
orientation of images downloaded to a computer will
depend upon the software used to download the images.
58
Button
button.
(ISO Speed) and
See Menus and Settings (p. 19).
(normal),
(left end is down) will appear in the display.
button is pressed, the settings of
(White Balance), the
button will have no effect.
[Auto Rotate]
(right end
[On]*/
is