Automated Playback (Slide Show) - Canon PC1057 User Manual

Automated Playback (Slide Show)

Slide show image settings are based on DPOF standards (p. 147).
Starting a Slide Show
All images or a selection of images on a CF card can be displayed
one-by-one in an automated slide show.
All Images
Slide Show 1 – 3
1
In the [ (Play)] menu, select [Slide
Show] and press the SET button.
See Selecting Menus and Settings
(p. 44).
2
Press the
omni selector to select [Program].
Press the
between [All Images] or any one
of slide [Show 1] – [Show 3].
3
Press the
omni selector to select [Start] and
press the SET button.
The slide show will start and
automatically stop when the show is
done.
Pausing and Resuming a Slide Show
Press the SET button to pause the show. Press it again to resume.
Fast Forwarding/Rewinding a Slide Show
Turn the main dial or use the
move to the previous or next image.
Stopping a Slide Show
Press the MENU button during a slide show to stop it and display the
slide show menu.
Plays all the images on the CF card in order
Plays the images selected for each show in order.
or arrow on the
or arrow to select
or arrow on the
or arrow on the omni selector to
133