Maintenance - Electrolux BBO001 Instruction Manual

ENGLAND

MAINTENANCE

lFrequently check the mower and ensure that all grass deposits are removed from
beneath the deck.
lNever clean the mower by pouring water over it: this may seriously damage the electric
start system.
J J J J J
BLADE
(starts at page 36)
ll
To remove the blade (12) unscrew the screw (13).
lCheck the conditions of the blade-support (14), and replace any parts which are
damaged.
Before carrying out any operations on the cutting tool, disconnect the plug
lFrequently remove the wheel screws clean whith petroleum and oil before replacing.
Ball bearings must be greased before remounting.
lFrequently check the blade for damage.
lThe lawn mower must be checked by a SERVICE DEALER.
lWhen reassembling, make sure it is correctly seated in the shaft and that the cutting
edges face in the direction of the engine rotation. The blade screw (13) must be torqued
to 3,7 Kgm (35 Nm).
8