Table of Contents
Advertisement
Adjusts the picture display area.
Display Area
"Full Pixel": Displays pictures in their original size when parts of the picture are cut
(Except for
off.
KDL-32P35xx,
"Normal": Displays pictures in their recommended size.
32/26P55/S55xx)
~
• These options may change depending on the input displayed.
Set-up
Starts the initial set-up to select the language, country/region and location, and tune
Auto Start-up
in all available digital and analogue channels. Usually, you do not need to do this
operation because the language and country/region will have been selected and
channels already tuned when the TV was first installed (page 7). However, this
option allows you to repeat the process (e.g., to retune the TV after moving house).
Selects the language in which the menus are displayed.
Language
Tunes in all the available analogue channels.
Auto Tuning
Usually you do not need to do this operation because the channels are already tuned
(Only in analogue
when the TV was first installed (page 7). However, this option allows you to repeat
mode)
the process (e.g., to retune the TV after moving house, or to search for new channels
that have been launched by broadcasters).
Changes the order in which the analogue channels are stored on the TV.
Programme Sorting
(Only in analogue
1
mode)
2
Assigns a name to any equipment connected to the side and rear sockets. The name
AV Preset
will be displayed briefly on the screen when the equipment is selected.
1
2
Allows the TV to communicate with equipment that is compatible with the control
HDMI Set-up
for HDMI function, and connected to the HDMI sockets of the TV. Note that
communication settings must also be made on the connected equipment.
"Control for HDMI": Sets whether or not to link the operations of the TV and the
connected equipment that is compatible with control for HDMI.
"Auto Devices Off": When this is set to "On", the connected equipment that is
compatible with control for HDMI turns off when you switch the TV to standby
mode using the remote.
F
f
Press
/
to select the channel you want to move to a new position,
g
then press
.
F
f
Press
/
to select the new position for your channel, then press
F
f
Press
/
to select the desired input source, then press
F
f
Press
/
to select the desired option below, then press
•
AV1 (or AV2/AV3/HDMI1/HDMI2/HDMI3/Component/PC), VIDEO, DVD,
CABLE, GAME, CAM, SAT
connected equipment.
• "Edit": Creates your own label.
F
f
1 Press
/
to select the desired letter or number ("_" for a blank
space), then press
If you input a wrong character
G
g
Press
/
to select the wrong character. Then, press
character.
2 Repeat the procedure in step 1 until the name is completed, then
press
.
: Uses one of the preset labels to assign a name to
g
.
.
.
.
F
f
/
to select the correct
Continued
25
GB
Hide quick links:
Advertisement
Table of Contents
