Panasonic CQ-C9700U Operating Instructions Manual page 17

E
Audio Settings
N
(continued)
G
L
I
S
H
25
Subwoofer Level
You can change the subwoofer volume level.
Default: 0 dB
Setting range: j¶ (subwoofer mute),
j6 dB to i6 dB (by 2 dB)
Subwoofer Low Pass Filter
(LPF)
You can select the upper limit frequency of the
sound from subwoofer.
Default: 120 Hz
Setting range: OFF, 60 Hzj160 Hz (by 5 Hz)
High Pass Filter (HPF)
Select the lower limit frequency of the sound
from speakers (except subwoofer).
Default: OFF
Setting range: OFF, 90 Hzj225 Hz (by 5 Hz)
44
CQ-C9800/9700U
1
Press [VOLUME]
(PUSH SEL: select).
Press [SEL].
(Push.)
(page 42)
Push
Push
Push
2
Turn [VOLUME].
Press [VOL "] or [VOL #].
[VOLUME "]
[VOLUME #]
[VOLUME "]: Increased
[VOLUME #]: Decreased
[VOLUME "]: Increased
[VOLUME #]: Decreased
[VOLUME "]: Increased
[VOLUME #]: Decreased
[SEL]
POWER MENU
(Select) [VOL "]
SOURCE SEL
NUMBER VOL
[VOL #]
#
MUTE
1 2 3
RAND SCAN REP
4 5 6
7 8 9
[DISP]
0
BAND DISP
SET
(Display)
Car Audio
Note:
≥ Press [DISP] (display) to return to the
regular mode.
≥ If no operation takes place for more than
5 seconds in audio setting (2 seconds in
the volume setting), the display returns to
the regular mode.
≥ When SBC-SW setting (page 23) has
been selected to ON, the settings resulting
from the adjustments performed at the
subwoofer level and subwoofer low pass
fi lter settings are refl ected in the output.
45
CQ-C9800/9700U
E
N
G
L
I
S
H
26