Features Menu - Sony KDL-26P3000 Operating Instructions Manual

Features menu

Features
Screen
Power Saving
AV2 Output
RGB Centre
PC Adjustment
Timer
Back: Select:
Screen
Power Saving
AV2 Output
RGB Centre
Standard
TV
0
Enter: Exit:
MENU
Changes the screen format.
"Auto Format": Automatically changes the screen format according to the
broadcast signal.
"Screen Format": For details about the screen format, see page 13
"V-Size": Adjust the vertical size of the picture when "Screen Format" is set to
"Smart".
z
• Even if you have selected "On" or "Off" in "Auto Format", you can always modify the
format of the screen by pressing
• "Auto Format" is available for PAL and SECAM signals only.
Selects the power saving mode to reduce the power consumption of the TV.
"Standard": Default settings.
"Reduce": Reduces the power consumption of the TV.
"Picture Off": Switches off the picture. You can listen to the sound with the picture
off.
Sets a signal to be output through the socket labelled
TV. If you connect a VCR to the
equipment connected to other sockets of the TV.
"TV": Outputs a broadcast.
"Auto": Outputs whatever is being viewed on the screen. Not available for
AV3, AV4, AV5 and PC.
Adjusts the horizontal picture position so that the picture is in the middle of the
screen.
z
This option is only available if an RGB source has been connected to the Scarts connectors
1/ 1 2/
or
You can select the options listed below on the
Features menu. To select options in "Settings",
see "Navigating through menus" (page 20).
repeatedly.
/ 2 socket, you can then record from the
2
on the rear of the TV.
/ 2 on the rear of the
Continued
25
GB