Panasonic CQ-VW100U Operating Instructions Manual page 33

Input
input selection
Note:
¡If a non-Panasonic navigation system is connected to
this unit, we do not guarantee the operations of the
navigation system.
AV1
(AV1 input selection)
: an external device is connected to AV1.
AV1
: skips AV1.
Skip
AV2
(AV2 input selection)
: an external device is connected to AV2.
AV2
: Select one from among NAV1, NAV2,
NAV1-3
and NAV3 with which images are dis-
played most beautifully when a non-
Panasonic car navigation system is con-
nected.
: skips AV2.
Skip
CH-C Video Input
( a
(Rear view camera set up)
Camera
Selection of the terminal that connects to the rear view
camera.
Preparation: Connect the reverse lead. (
Instructions)
: background camera view is always on
BGC
the display.
: connected to the CAMERA IN
On
: unconnected
Off
Note:
¡Make sure to select
Off
connected.
¡The image from the rear view camera may be blurred
in the night or a dark place.
¡CY-RC50KU is not available as a background camera.
Ext. In
( a
Memory Clear
Memory clearance
The state of all of the current memories are returned to
default settings.
Note:
¡The ID code is not deleted by executing memory clear.
default:
AV1
default:
AV2
System Upgrade Guidebook)
a Installation
default:
Off
when no rear view camera is
System Upgrade Guidebook)
: clears the memory to default settings.
Yes
: no memory clear.
No
The display returns to the previous one.
: proceed.
OK
: no memory clear.
Cancel
Caution
¡Be aware that this setting restores the unit to default
settings, so that all the memories and settings that
you have set will be eliminated.
Other
Other settings
(Setting ACC selection ON and
ACC Select
OFF)
: sets to ON if your car has ACC position.
On
: sets to OFF if your car has no ACC posi-
Off
tion.
Note:
¡For an ACC-equipped car, select ON. The following
functions are available.
¡The power is turned on automatically when inserting
a disc or magazine.
¡ selection disables turning on the power of the
Off
main unit through the remote control.
Caution
¡Be sure to select off when your car has no ACC
position in the ignition switch. Failure to do this
could cause the battery to go dead.
OFF
ACC
IGN
appears when
Really?
is selected.
Yes
default:
On
CQ-VW100U
32
33