Analog Line-In Recording - Canon Optura 600 Instruction Manual

Analog Line-in Recording

You can input video from other analog devices (VCR, TV or camcorder) via the S-video
terminal or AV terminal, and record the input video on the tape in the camcorder. You can
also record the input video as a movie or still image on a memory card.
Connecting
Refer also to the instruction manual of the connected device.
You can also connect via the S-video terminal (
Recording
1. Set the camcorder to PLAY(VCR)•
2. Press the MENU button and select [VCR SETUP]. Select [VIDEO
INPUT] followed by a setting option and press the MENU button.
3. Connected device: Load the recorded cassette.
4. Press the REC PAUSE button.
In record pause mode and during recording, you can check the picture on the screen.
5. Connected device: Play back the tape.
6. Press the
Recording starts.
7. Press the
• Press the
• Press the
8. Connected device: Stop playback.
98
VIDEO
L
AUDIO
R
/ button when the scene you wish to record appears.
button to stop recording.
/ button to pause recording.
/ button again to restart recording.
39).
Signal flow
MTC-100 Multi Cable
(Supplied)
mode and load a blank cassette.