Canon Optura 600 Instruction Manual page 103

Turning On the Analog-Digital Converter
MENU
VCR SETUP
( 64)
1. Set the camcorder to PLAY(VCR)•
Check the video input setting (
2. Press the MENU button and select [VCR SETUP]. Select [AV
set it to [ON] and press the MENU button.
Depending on the signal sent from the connected device, the conversion from
analog to digital signals might not work properly (e.g., signals that include
copyright protective signals or anomalous signals such as ghost signals).
For normal use, set [AV
cannot be input via the camcorder's DV terminal.
We recommend powering the camcorder from a household power source.
Connecting the camcorder to the computer you can also use the analog-digital
conversion to transfer analog recordings to your computer as digital signals.
Analog-digital conversion can be performed also when connecting the
camcorder to the computer using the USB cable.
The required equipment and operation is the same as when Transferring Video
Recordings to a Computer (
[AV DV/
the computer.
The analog-digital conversion may not operate properly depending on the
software and the specifications and settings of your computer.
66).
DV/ ] to [OFF]. If it is set to [ON], digital signals
119), except for step 3: In this case set the
] to [ON]. Check the setting before connecting the camcorder to
AV DV/
mode.
E
DV/ ],
103