Additional Information; Troubleshooting - Sony Bravia KDL-22PX300 Operating Instructions Manual

Additional Information

Troubleshooting

Check whether the 1 (standby) indicator is flashing in red.
When the 1 (standby) indicator is flashing
The self-diagnosis function is activated.
1
Count how many times the 1 (standby) indicator flashes between each three second
break.
For example, the indicator may flash three times, go off for three seconds, then flash again three
times.
2
Press 1 on the TV to turn it off, disconnect the AC power cord (mains lead), and inform
your dealer or Sony service centre of how the indicator flashes (number of flashes).
When the 1 (standby) indicator is not flashing
1
Check the items in the tables below. (Also refer to "Troubleshooting" in the i-Manual.)
2
If the problem persists, have your TV serviced by qualified service personnel.
Condition
Picture
There is no picture (screen
is dark) and no sound.
Tiny black points and/or
bright points appear on the
screen.
Sound
The audio output from a
DVD is low.
General
The TV turns off
automatically (the TV
enters standby mode).
The remote does not
function.
The "Parental Lock"
password of the TV setting
menu has been forgotten.
The TV surrounds become
warm.
Explanation/Solution
• Check the antenna (aerial)/cable connection.
• Connect the TV to the AC power (mains), and press 1 on the TV.
• If the 1 (standby) indicator lights up in red, press TV "/1.
• The screen is composed of pixels. Tiny black points and/or bright
points (pixels) on the screen do not indicate a malfunction.
• Select "Off" in "Digital Out (Optical)" (page 10), and change the
output volume from the DVD to "+1" or "+2". For details, see the
User's Guide on the Internet (page 8).
• Check if the "Sleep Timer" is activated, or confirm the
"Duration" setting of "On Timer".
• Check if the "Idle TV Standby" is activated.
• Replace the batteries.
• Your TV may be in SYNC mode.
Press SYNC MENU, select "TV Control" and then select "Home
(Menu)" or "Options" to control the TV.
• Check the function buttons on the remote. If PS2 is selected in
TV mode or TV is selected in PS2 mode, the remote will not
function.
• Enter 9999 for the PIN code. (PIN code 9999 is always accepted.)
• When the TV is used for an extended period, the TV surrounds
become warm.
You may feel hot when touching there by the hand.
11
GB