Network Easy Setting - Panasonic DMP-BDT310 Owner's Manual

Network Easy Setting

The configuration of your network is about to begin. If you
failed to make the settings, refer to page 14.
Wired connection
Select "Wired" and press [OK].
[BDT310]
Network Easy Setting
Select a connection mode.
Current setting : Wired
LAN cable connection:
Connect a LAN cable to the unit and select "Wired."
Wireless LAN connection:
Select "Wireless."
Wired
Wireless
OK
RETURN
Follow the on-screen instructions to make your connection
settings.
Wireless connection
Preparation
≥ Obtain your network name (
≥ If your wireless connection is encrypted please be
sure that you know your encryption key.
≥ [BDT110] : If "Wireless LAN Adaptor is not connected." is
displayed, check that the Wireless LAN Adaptor is fully
inserted. Alternatively, disconnect and reconnect it. If there
is still no change in the display, consult your dealer for
advice.
1
Select "Wireless" and press [OK].
2
Select "Search for wireless network" or
"WPS (PUSH button method)" and press
[OK] then follow the on-screen
instructions and make the settings.
Wireless Settings
Select a connection method.
Please refer to the operating instructions of your wireless
access point about connection methods.
Search for wireless network
WPS (PUSH button method)
∫ "WPS (PUSH button method)"
If you are using a Wireless router that supports WPS (Wi-Fi
Protected Setup), you can easily perform the settings.
15, SSID).
∫ "Search for wireless network"
The available wireless networks will be displayed.
1 Select your network name and press [OK].
≥ If your network name is not displayed search again by
pressing the [R] button on the remote control. Stealth
SSID will not be displayed, in this case enter manually.
Wireless Settings
Select a wireless network for connection.
Network name (SSID)
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
OK
R Search again
SUB
RETURN
MENU
When your wireless network is encrypted
2 Press [OK] to select "Encryption Key".
Wireless Settings
Enter the encryption key of the wireless network.
Encryption Key
Set
3 Enter your encryption key.
Encryption Key
_
1 1 2 3 4 5 6 7 8 9 0
2
A B C
3 D E F
4 G H I
Delete
5
J K L
6 M N O
Finish
7 P Q R S
8
T U V
9
W X Y Z
0
OK
0 - 9
RETURN
To enter SSID manually
If your SSID is not displayed in step 1, follow these steps.
1 To display SSID input screen :
Press [HOME] select "Setup"
Settings" select "Network"
Settings" [OK] select "Wireless Settings"
select "Connection Setting"
setting" [OK]
2 Press [OK] to select "SSID" and enter your SSID.
Wireless Settings
Enter your network name (SSID) to connect.
SSID
Set
≥ If your wireless network is encrypted, go to step 2.
Reception
G B Y
a b c + - *
d e f
/ = %
g h i
# $ &
j k l < > @
m n o [ ] _
p q r s
( )
~
t u v { }
w x y z
\ I
" ' : ; ` ^
. , ? !
Space
select "Player
[OK] select "Network
[OK]
[OK] select "Manual
VQT3B58
13