Chapter 2 Hardware Installation; Install Socket Am2/Am2+ Supported Amd Processor; Install Memory - AMD 740G Series User Manual

Chipset & chipset based m/b for socket am2+ 64-bit quad core processor
Hide thumbs Also See for 740G Series:
Table of Contents

Advertisement

Hardware Installation

2-1 Install Socket AM2/AM2+ Supported AMD Processor

This motherboard provides a 940-pin surface mount, Zero Insertion Force (ZIF) socket,
referred to as the mPGA940 socket supports AMD Athlon64 processor in the 940 Pin package
utilizes Flip-Chip Pin Grid Array package technology.
The CPU that comes with the motherboard should have a cooling FAN attached to prevent
overheating. If this is not the case, then purchase a correct cooling FAN before you turn on
your system.
Be sure that there is sufficient air circulation across the processor's
WARNING!
heatsink and CPU cooling FAN is working correctly, otherwise it may
cause the processor and motherboard overheat and damage, you may install
an auxiliary cooling FAN, if necessary.
To install a CPU, first turn off your system and remove its cover. Locate the ZIF socket and
open it by first pulling the level sideways away from the socket then upward to a 90-degree
angle. Insert the CPU with the correct orientation as shown below. The notched corner
should point toward the end of the level. Because the CPU has a corner pin for two of the
four corners, the CPU will only fit in the orientation as shown.
When you put the CPU into the ZIF socket, No force require to insert of the CPU, then press
the level to Locate position slightly without any extra force.
2-2

Install Memory

The motherboards provide two 240-pin DDRII DUAL INLINE MEMORY MODULES
(DIMM) slots for DDRII memory expansion available from minimum memory size of
128MB to maximum memory size of 4 GB DDRII SDRAM.
Valid Memory Configurations of 2-DIMM Design Motherboard
Bank
Bank 0, 1 (DIMM1) DDRII533/DDRII667/DDRII800/DDRII1066 X1
Bank 2, 3 (DIMM2) DDRII533/DDRII667/DDRII800/DDRII1066 X1
Total
Recommend DIMM Module Combination
1.
One DIMM Module ----Plug in DIMM1
2.
Two DIMM Modules---Plug in DIMM1 and DIMM2 for Dual channel function
For Dual channel Limited!
Chapter 2
Colden Arrow
CPU ZIF mPGAB Socket
240-Pin DIMM
System Memory (Max. 4GB)
5
PCS
Total Memory
128MB∼2 GB
128MB∼2 GB
2
128MB∼4 GB

Advertisement

Table of Contents
loading

Table of Contents