General Information - Sharp R-24ST Service Manual

MICROWAVE OVEN
R-24ST/R-2B34(AL/K/W/ST)
GENERAL IMPORTANT INFORMATION
This Manual has been prepared to provide Sharp Corp.
Service Engineers with Operation and Service Information.
It is recommended that service engineers carefully study the
entire text of this manual, so they will be qualified to render
satisfactory customer service.
WARNING
Note: The parts marked "*" are used at voltage
more than 250V. (Parts List)
Anm: Delar märket med "*" har en spänning
överstigande 250V.
Huom: Huolto-ohjeeseen merkitty. "tähdella" osat
joissa jännite on yli 250V.
Bemerk: Deler som er merket "asterisk" er utsatt for
spenninger over 250V til jord.
Bemærk: Dele mærket med stjerne benyttes med
hojere spænding end 250 volt.
WARNING
Never operate the oven until the following points are ensured.
(A) The door is tightly closed.
(B) The door and oven hinges are not defective.
(C) The door packing is not damaged.
(D) The door is not deformed or warped.
(E) There is not any other visible damage with the oven.
Servicing and repair work must be carried out only by trained
Service Engineers.
All the parts marked "*" on parts list are used at voltages more
than 250V.
Removal of the outer wrap gives access to potentials above
250V.
All the parts marked "∆" on the parts list may cause undue
microwave exposure, by themselves, or when they are dam-
aged, loosened or removed.
SHARP CORPORATION
OSAKA, JAPAN
SERVICE MANUAL
R-24ST/R-2B34 - 3
SERVICING

GENERAL INFORMATION

PRODUCT SPECIFICATION
APPEARANCE VIEW
OPERATING SEQUENCE
FUNCTION OF IMPORTANT
COMPONENTS
TROUBLESHOOTING CHART
TEST PROCEDURE
TOUCH CONTROL PANEL
COMPONENT
REPLACEMENT AND
ADJUSTMENT PROCEDURE
MICROWAVE MEASUREMENT
TEST DATA AT A GLANCE
WIRING DIAGRAM
PARTS LIST