How To Connect The Hdmi Terminal - Panasonic TC-32LH1 Operating Instructions Manual

32" diagonal widescreen hdtv lcd display tc-32lh1 operating manual
Table of Contents

Advertisement

How to connect the HDMI Terminal

HDMI
1
(HDMI : High Definition Multimedia Interface) is the first all digital consumer electronics A/V interface
that supports uncompressed standard. One jack supports both video and audio information.
1
This HDMI
input can be connected to an EIA/CEA-861/861B
such as a Set Top Box or DVD player equipped with HDMI or DVI output connection.
By inputting a High-bandwidth Digital Content Protection (HDCP) high-definition picture source to the HDMI
terminal of this television, high-definition pictures can be displayed on the screen in their digital form.
Audio Cable
(not included)
If the external device has DVI output only, use a HDMI-DVI
conversion cable
3
Also, connect the Audio out signal from the external device.
(Set Top Box or DVD player) to the AUDIO IN
the HDMI input.
Applicable VIDEO Signal
This model support following format.
Please adjust the format of connecting equipment.
1080i
480P
480i
This input terminal is not intended for use with computers.
AUDIO signal (L.PCM)
When the digital sound signal is included at connecting HDMI equipment, L.PCM sound is available.
Sampling frequency
48KHz / 44.1KHz / 32 KHz
Notes:
(1) This HDMI connector is Type A.
(2) If you cannot display the picture because your Digital Set Top Box does not have a Digital OUT terminal
Output setting, use the component Video input (or the S video Input or Video Input). In this case the picture
will be displayed as an analog signal.
1. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks
of HDMI Licensing LLC.
2. EIA/CEA-861/861B profiles compliance covers profiles for transmission of uncompressed digital video
including high bandwidth digital content protection.
3. HDMI-DVI conversion cable part no.
Center at 1-800-332-5368 or on the Panasonic Website (USA only) at www.panasonic.com.
4. AUDIO-IN, Please refer to page 24. (HDMI-IN)
12
to connect to the HDMI jack on the LCD.
No. of dots (H
V)
1,920
1,080i
720
480P
640
480P
720(1,440)
480i
(TY-SCH03DH):available from the Panasonic National Parts
2
compliant consumer electronic device,
HDMI Cable (not included)
HDMI or DVI
signal out
4
jacks beside
Vertical scanning frequency(Hz)
59.94/60
59.94/60
59.94/60
59.94/60
Set Top Box
DVD player

Advertisement

Table of Contents
loading

Table of Contents