Table of Contents
Advertisement
EN 12
4.
TPM1.1U LA
4.3.2
Rear Cover
1. Remove the screws remarked in red, which secure the rear
cover. The screws are located at the top, bottom, left and
right sides.
2. Lift the rear cover from the cabinet. Make sure that wires
and flat foils are not damaged during cover removal.
19MF338B
Figure 4-7 Remove rear cover
19PFL3403D
Figure 4-8 Remove rear cover
19MD358B
Figure 4-9 Remove rear cover
Mechanical Instructions
4.3.3
I_17550_067.eps
060308
I_17550_068.eps
060308
I_17550_080.eps
070308
Power Board
1. Refer to next figure
2. Unplug connector remarked in blue.
3. Release screws(0G1T 1130 8120 and 0G1T 1130
10120)remarked in red and remove the board.
When defective,replace the whole unit
19MF338B&19PFL3403D
Figure 4-10 Power Board
19MD358B
Figure 4-11 Power Board
I_17550_005.eps
120208
I_17550_069.eps
060308
Advertisement
Table of Contents
