Guided Setup; Connect Cables - NEC UNIVERGE BLUE ITK-6DGS-1 Start Manual

Guided Setup

Adjust the Angle of the Tilt Leg
To adjust the tilt level of the ITK-6DGS-1:
1. The height can be adjusted by moving the legs, which are attached to
the bottom of the terminal.
Turn the phone over (key side down).
2.
Adjust the legs to the desired height (upward to raise the height and
3.
downward to lower the height).

Connect Cables

Please follow the diagram to install your phone. Once plugged in, the phone
automatically downloads its configuration and starts to work. The voicemail
box is functional with a default greeting.
Connect an Ethernet cable to the LAN port on the phone and connect
1.
the other end to your network.
2
1 - To PC Connector
2 - LAN Connector
3 - LAN Straight Cable
4 - Groove
5 - Multiline Terminal