Frigidaire FNGC90JGRS User Manual page 19

D. Handle
The support hook is installed in the top
of the oven cavity.
You can leave the support hook in the
oven, when the turnspit is not active.
1. Open the oven door.
2. Put the turnspit handle into the spit.
3. Snap out one end of the support hook
from the oven ceiling A and let it hang
on the other end.
A
4. Install the first fork on the spit, then put
the meat on the turnspit and install the
second fork.
Make sure that the meat is in the middle
of the spit.
5. Use the screws to tighten the forks.
6. Put the tip of the spit into the turnspit
hole.
Refer to "Product description" chapter.
OVEN - USING THE ACCESSORIES
7. Put the front part of the spit on the
support hook.
8. Remove the turnspit handle.
9. Light the grill.
Refer to "Oven - Daily use" chapter.
10. Press the turnspit button
11. Make sure that turnspit rotates.
12. Close the oven door.
The turnspit does not stop if you open
the oven door.
When meat is ready press the turnspit
button. Turn off the grill. Install the turnspit
handle. Carefully remove the turnspit and
the roasting pan from the oven.
.
19