Installation; Unpacking - Electrolux EWF12853 User Manual

11.

INSTALLATION

11.1 Unpacking

CAUTION!
All transit bolts and packing must be
removed before using the appliance.
You are advised to keep all transit
devices so that they can be refitted if
the machine ever has to be
transported again.
1. Use gloves. Cut and remove four cut
out straps as shown.
2. Remove the carton box. Remove the
polystyrene packaging materials.
Remove the plastic bag which cover
the machine.
3. Open the door. Remove the
polystyrene piece from the door seal
and all the items from the drum.
4. Put one of the polystyrene packaging
elements on the floor behind the
appliance. Carefully put down the
appliance with the rear side on it.
Make sure not to damage the hoses.
5. Remove the polystyrene base.
Pull up the appliance in vertical
6.
position.
7. Remove the power supply cable and
the drain and inlet hoses from the
hose holders (A) on the rear of the
appliance.
29
1
2